Your online source for Replacement Small Engines, Tools & Parts

Email: sales@smallenginesuppliers.com

**Engine Specifications & Line Drawings Pages**

Larger Image $ 349.99 Briggs & Stratton 130G52-0182-F1 XR950 Professional 6:1 Gear Reduction Briggs & Stratton 130G52-0182-F1 XR950 Professional 6:1 Gear Reduction Supersedes 12S452-0049, 122052-0549, 123352-0049, 120252-0549, 120352-0549, 126352-0049 and 126352-0549, 12S452-0549 Crankshaft Extension: 3/4" x 2" Length, 3/16" Keyway Shipping Weight: 45 lbs. Features: 6:1 gear reduction (CCW rotation) Dura-Bore™ cast iron cylinder sleeve CARB compliant engine; good for sale in all states including CA Overhead valve design (OHV) Remote, manual or adjustable throttle control Dual-Clean™ pleated paper air filter with pre-cleaner Float carburetor for consistent easy starting Low oil sensor device Starter: Rewind Approx. mounting base dimensions 6.38" x 3.13" Flange mount bolt circle 3-5/8" Applications: Universal replacement engine for mixers, rollers, pumps, aerators etc. Factory Warranty: Consumer Use: 2 Years Commercial Use: 1 Year NO SALES TO CALIFORNIA Larger Image $ 399.99 Briggs & Stratton 15T212-0160-F8 1150 Series OHV Briggs & Stratton 15T212-0160-F8 1150 Series OHV Supersedes 12S402-0060, 150212-2560 & 15T212-0060 Crankshaft Extension: 1" x 2-7/8" Length, Tapped 3/8" - 24, With Keyway Shipping Weight: 45 lbs. Features: Kool Bore™ aluminum alloy bore for cooler operation Overhead valve design (OHV) Dual-Clean pleated paper air filter with pre-cleaner Starter: Rewind Factory Warranty: Consumer Use: 2 Years Commercial Use: 1 Year NO SALES TO CALIFORNIA Larger Image $ 349.99 Briggs & Stratton 19N132-0019-F1 1450 Series OHV Model Number: 19N132-0019-F1 1450 Series - 14.50 Gross Torque (Estimated 10 HP) Supersedes 205332-0537 8 HP, 205432-0537, 203432-0036, 20T232-0036, 206432-0036, 201332-0536, 20S232-0037 Can be used in place of 201432-0036 or 201332-0536 or 204432-0036 or 204332-0536 & 20T232-0036, 19N132-0035 NOTE: THE ABOVE STATEMENT ONLY APPLIES TO ENGINES THAT DO NOT MOUNT BY THE BASE. THE SHAFT HEIGHT ON THIS ENGINE IS 5.25", THE SHAFT HEIGHT ON THE 20 SERIES ENGINES LISTED ABOVE WAS 4.17" SO IF IT MOUNTS USING THE BASE OF THE ENGINE THIS ENGINE WILL NOT REPLACE IT. DO NOT USE THIS ENGINE FOR LEAF BLOWERS OR CHIPPER SHREDDERS OR TRAC VAC- USE 19L232-0037 INSTEAD. THE MUFFLER ON THIS ENGINE WILL INTERFERE WITH THE EQUIPMENT. Crankshaft Extension: 1" x 3-21/32" length, Tapped 7/16" - 20, 1/4" Keyway Shipping Weight: 64 lbs. Features: Dura-Bore cast iron cylinder sleeve Overhead valve design (OHV) Remote, manual or adjustable throttle control PTO Ball Bearing Manual Choke Rocker Stop Switch 3.2 Quart Tank Top Governed Speed - 3750 RPM Low oil sensor device (Oil Guard) Starter: Rewind Applications: Universal replacement engine for sprayers, compressors, rollers, log splitters, pumps, etc. Factory Warranty: Consumer Use: 2 Years Commercial Use: 1 Year NO SALES TO CALIFORNIA Larger Image $ 499.99 Briggs & Stratton 20S212-0118-F1 Intek 1450 Series Briggs & Stratton 20S212-0118-F1 Intek 1450 Series Generator Engine NOTE: There is VERY limited supply of this engine. Please email to ask about availability, AND This is a Generator Engine (Has a tapered shaft) Can be used in place of 20S232-0038 .872" x 4.348" TAPERED crankshaft, tapped 5/16-24 Fixed Speed - 3750 RPM +/- 100 RPM Shipping Weight: 75 lbs. (dimensional weight because of packaging) Manual Choke Rocker Stop Switch Low Oil Alert 3.2 Quart Fuel Tank Lo-tone muffler Recoil Start NO SALES TO CALIFORNIA Larger Image $ 579.99 Briggs & Stratton 19L237-0013-F1 10 HP Vanguard Briggs & Stratton 19L237-0013-F1 10 HP Vanguard 1" x 3-21/32" crankshaft with full keyway Tapped 7/16-20 Recoil Start & 12V Electric Start with 3 amp alternator Flange Mount & Ball Bearings Manual Choke & Throttle Starter Switch Has Tank & Lo-Tone Muffler with Stamped Guard Transport guard system simultaneous fuel/ignition shut-off protects the engine from oil/fuel dilution during transport Factory Warranty: Consumer Use: 3 Years Commercial Use: 3 Year Applications: Tillers, Log Splitters, Compactors Shipping weight 103 (Dimensional Weight & Value) NO SALES TO CALIFORNIA Larger Image $ 449.99 Briggs & Stratton 19L232-0036-F1 10 HP Vanguard Briggs & Stratton 19L232-0036-F1 10 HP Vanguard 1" x 2-29/32" crankshaft with full keyway Tapped 3/8-24 Recoil Start Commercial quality carburetor with sediment filter Maintenance free Magnetron ignition for quick, dependable starts Dual Clean Air Filter Low oil shut down sensor OHV Design Transport guard system simultaneous fuel/ignition shut-off protects the engine from oil/fuel dilution during transport Factory Warranty: Consumer Use: 3 Years Commercial Use: 3 Year Applications: Tillers, Log Splitters, Compactors Shipping weight 67 lbs NO SALES TO CALIFORNIA Larger Image $ 679.99 Briggs & Stratton 19L232-0037-F1 10 HP Vanguard Briggs & Stratton 19L232-0037-F1 10 HP Vanguard 1" x 3-21/32" crankshaft with full keyway Tapped 7/16-20 Recoil Start Commercial quality carburetor with sediment filter Maintenance free Magnetron ignition for quick, dependable starts Dual Clean Air Filter Low oil shut down sensor OHV Design Transport guard system simultaneous fuel/ignition shut-off protects the engine from oil/fuel dilution during transport Factory Warranty: Consumer Use: 3 Years Commercial Use: 3 Year Applications: Tillers, Log Splitters, Compactors Shipping weight 67 lbs Shipping is discounted for this item (calculated for 40 lb) NO SALES TO CALIFORNIA Larger Image $ 579.99 Briggs & Stratton 25T237-0085-F1 21 Torque Engine Model Number: 25T237-0085-F1 21 Torque Engine Supersedes 25T237-0045-F1 Dura-Bore™ cast iron cylinder sleeves for extended life Dual ball bearing Dual-Clean™ air cleaner pleated paper filter with a foam pre-cleaner ensures maximum protection for extended engine life Overhead valve design (OHV) for cooler operation and longer valve life Mechanical Governor Buyer protection package provides two-year limited consumer engine warranty Crankshaft Extension: 1" x 3-31/64", Tapped 7/16" - 20, 1/4" Keyway Remote, manual or adjustable throttle control Manual Choke 6.9 Quart Tank Oil Guard (Low oil sensor device) Starter: Electric Start with 10 amp regulated alternator with Starter panel assembly, auxiliary rewind Applications: Universal replacement for sprayers, compressors, rollers, pumps, etc. Factory Warranty: Consumer Use: 2 Years Commercial Use: 1 Year This engine is shipped via truck to a business address or the nearest truck terminal. You normally have 5 business days to pick up at the terminal. Residential shipping is $95 extra. Please email us in advance of trying to ship this engine to a residence so we can explain the options. To view our shipping policies, click here. NO SALES TO CALIFORNIA Larger Image $ 839.99 Briggs & Stratton 25V337-0012-F1 14 Gross HP Vanguard Engine Briggs & Stratton 25V337-0012-F1 14 Gross HP Vanguard Engine Dura-Bore™ cast iron cylinder sleeve for extended life 12V Electric and Bolt on Recoil Start with 20 amp alternator 1" x 3-21/32" Keyed Crankshaft, Tapped 7/16-20 Flange M,ount & Ball Bearings Manual Choke & Throttle Starter Switch & Fuel Shut-Off Has Fuel Tank & Super Lo-Tone Muffler with Stamped Guard Shipping Weight: 95 lbs. (Dimensional Weight) NO SALES TO CALIFORNIA Larger Image $ 649.99 Briggs & Stratton 19N132-0051-F1 1450 Series OHV Model Number: 19N132-0051-F1 1450 Series - 14.50 Gross Torque (Estimated 10 HP) Can be used in place of 20S232-0063, 202332-0563, 202432-0063 & 202332-0063 NOTE: THE ABOVE STATEMENT ONLY APPLIES TO ENGINES THAT DO NOT MOUNT BY THE BASE. THE SHAFT HEIGHT ON THIS ENGINE IS 5.25", THE SHAFT HEIGHT ON THE 20 SERIES ENGINES LISTED ABOVE WAS 4.17" SO IF IT MOUNTS USING THE BASE OF THE ENGINE THIS ENGINE WILL NOT REPLACE IT. DO NOT USE THIS ENGINE FOR LEAF BLOWERS OR CHIPPER SHREDDERS OR TRAC VAC. THE MUFFLER ON THIS ENGINE WILL INTERFERE WITH THE EQUIPMENT. Crankshaft Extension: 3/4" x 2-1/2" length, Tapped 3/8 - 24, 3/16" Keyway Shipping Weight: 120 lbs. (This engine does not weigh 120 lbs, BUT, it ships via truck LTL which is why the shipping weight is in at 120 lbs - because of the cost of truck shipping) Features: Dura-Bore cast iron cylinder sleeve Overhead valve design (OHV) Remote, manual or adjustable throttle control PTO Ball Bearing Manual Choke Rocker Stop Switch 3.2 Quart Tank Top Governed Speed - 3750 RPM Starter: Rewind Applications: Universal replacement engine for sprayers, compressors, rollers, log splitters, pumps, etc. Factory Warranty: Consumer Use: 2 Years Commercial Use: 1 Year NO SALES TO CALIFORNIA

 



All trademarks and registered trademarks are the property of their respective owners.

Images are representative. Actual engine/part may vary. Please verify your engine/part will work before ordering.

Please email comments about this website to webmaster@smallenginesuppliers.com